2. Verificar conectividad con PING desde el Router hacia PC y Router vecinos
3.Habilite OSPF de área 0
R2(config)#router ospf 10
R2(config-router)#network 200.210.221.0 0.0.0.255 area 0
R2(config-router)#network 200.210.222.128 0.0.0.3 area 0
R2(config-router)#network 200.210.222.132 0.0.0.3 area 0
R2(config-router)#end
4. Verificar el anuncio de redes con "show ip route"
Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
O 200.210.220.0/24 [110/129] via 200.210.222.133, 00:03:13, Serial0/0/1
O 200.210.221.0/24 [110/65] via 200.210.222.133, 00:09:23, Serial0/0/1
200.210.222.0/24 is variably subnetted, 5 subnets, 3 masks
C 200.210.222.0/25 is directly connected, GigabitEthernet0/1
L 200.210.222.1/32 is directly connected, GigabitEthernet0/1
O 200.210.222.128/30
[110/128] via 200.210.222.133, 00:03:23, Serial0/0/1
C 200.210.222.132/30 is directly connected, Serial0/0/1
L 200.210.222.134/32 is directly connected, Serial0/0/1
Router#
5.Conteste las siguientes preguntas:
-¿Cuantas redes aparecen en la tabla de enrutamiento?
3
-¿Cuantas deberían de aparecer?
3
6.Verifique estatus de OSPF
-show ip ospf
Router#show ip ospf
Routing Process "ospf 1" with ID 200.210.222.1
Start time: 00:07:32.828, Time elapsed: 00:35:42.156
Supports only single TOS(TOS0) routes
Supports opaque LSA
Supports Link-local Signaling (LLS)
Supports area transit capability
Supports NSSA (compatible with RFC 3101)
Event-log enabled, Maximum number of events: 1000, Mode: cyclic
Router is not originating router-LSAs with maximum metric
Initial SPF schedule delay 5000 msecs
Minimum hold time between two consecutive SPFs 10000 msecs
Maximum wait time between two consecutive SPFs 10000 msecs
Incremental-SPF disabled
Minimum LSA interval 5 secs
Minimum LSA arrival 1000 msecs
LSA group pacing timer 240 secs
Interface flood pacing timer 33 msecs
Retransmission pacing timer 66 msecs
Number of external LSA 0. Checksum Sum 0x000000
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
--More-- Number of areas transit capable is 0
External flood list length 0
IETF NSF helper support enabled
Cisco NSF helper support enabled
Reference bandwidth unit is 100 mbps
Area BACKBONE(0) (Inactive)
Number of interfaces in this area is 2
Area has no authentication
SPF algorithm last executed 00:00:26.424 ago
SPF algorithm executed 2 times
Area ranges are
Number of LSA 1. Checksum Sum 0x0074CA
Number of opaque link LSA 0. Checksum Sum 0x000000
Number of DCbitless LSA 0
Number of indication LSA 0
Number of DoNotAge LSA 0
Flood list length 0
-show ip ospf neighbor
Router#show ip ospf neighbor interface
GigabitEthernet0/1 is up, line protocol is up
Internet Address 200.210.222.1/25, Area 0, Attached via Network Statement
Process ID 1, Router ID 200.210.222.1, Network Type BROADCAST, Cost: 1
Topology-MTID Cost Disabled Shutdown Topology Name
0 1 no no Base
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 200.210.222.1, Interface address 200.210.222.1
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Hello due in 00:00:02
Supports Link-local Signaling (LLS)
Cisco NSF helper support enabled
IETF NSF helper support enabled
Index 2/2, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Serial0/0/1 is up, line protocol is up
Internet Address 200.210.222.134/30, Area 0, Attached via Network Statement
Process ID 1, Router ID 200.210.222.1, Network Type POINT_TO_POINT, Cost: 64
--More-- Topology-MTID Cost Disabled Shutdown Topology Name
--More-- 0 64 no no Base
--More-- Transmit Delay is 1 sec, State POINT_TO_POINT
--More-- Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
--More-- oob-resync timeout 40
--More-- Hello due in 00:00:01
--More-- Supports Link-local Signaling (LLS)
--More-- Cisco NSF helper support enabled
--More-- IETF NSF helper support enabled
--More-- Index 1/1, flood queue length 0
--More-- Next 0x0(0)/0x0(0)
--More-- Last flood scan length is 1, maximum is 1
--More-- Last flood scan time is 0 msec, maximum is 0 msec
--More-- Neighbor Count is 1, Adjacent neighbor count is 1
--More-- Adjacent with neighbor 200.210.222.133
--More-- Suppress hello for 0 neighbor(s)
Router#
-show ip ospf interface
Router#show ip ospf interface database rpo outer
OSPF Router with ID (200.210.222.1) (Process ID 1)
Router Link States (Area 0)
LS age: 621
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 200.210.222.1
Advertising Router: 200.210.222.1
LS Seq Number: 8000000B
Checksum: 0x2A70
Length: 60
Number of Links: 3
Link connected to: a Stub Network
(Link ID) Network/subnet number: 200.210.222.0
(Link Data) Network Mask: 255.255.255.128
Number of MTID metrics: 0
TOS 0 Metrics: 1
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 200.210.222.133
--More-- (Link Data) Router Interface address: 200.210.222.134
--More-- Number of MTID metrics: 0
--More-- TOS 0 Metrics: 64
--More--
Link connected to: a Stub Network
(Link ID) Network/subnet number: 200.210.222.132
(Link Data) Network Mask: 255.255.255.252
Number of MTID metrics: 0
TOS 0 Metrics: 64
LS age: 439
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 200.210.222.129
Advertising Router: 200.210.222.129
LS Seq Number: 80000002
Checksum: 0x1618
Length: 60
Number of Links: 3
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 200.210.222.133
(Link Data) Router Interface address: 200.210.222.129
Number of MTID metrics: 0
TOS 0 Metrics: 64
--More--
Link connected to: a Stub Network
(Link ID) Network/subnet number: 200.210.222.128
(Link Data) Network Mask: 255.255.255.252
Number of MTID metrics: 0
TOS 0 Metrics: 64
Link connected to: a Stub Network
(Link ID) Network/subnet number: 200.210.220.0
(Link Data) Network Mask: 255.255.255.0
Number of MTID metrics: 0
TOS 0 Metrics: 1
LS age: 439
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 200.210.222.133
Advertising Router: 200.210.222.133
LS Seq Number: 8000000A
Checksum: 0xD732
Length: 84
Number of Links: 5
--More--
--More-- Link connected to: a Stub Network
--More-- (Link ID) Network/subnet number: 200.210.221.0
(Link Data) Network Mask: 255.255.255.0
Number of MTID metrics: 0
TOS 0 Metrics: 1
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 200.210.222.1
(Link Data) Router Interface address: 200.210.222.133
Number of MTID metrics: 0
TOS 0 Metrics: 64
Link connected to: a Stub Network
(Link ID) Network/subnet number: 200.210.222.132
(Link Data) Network Mask: 255.255.255.252
Number of MTID metrics: 0
TOS 0 Metrics: 64
Link connected to: another Router (point-to-point)
(Link ID) Neighboring Router ID: 200.210.222.129
(Link Data) Router Interface address: 200.210.222.130
Number of MTID metrics: 0
TOS 0 Metrics: 64
--More-- Link connected to: a Stub Network
--More-- (Link ID) Network/subnet number: 200.210.222.128
--More-- (Link Data) Network Mask: 255.255.255.252
Number of MTID metrics: 0
TOS 0 Metrics: 64
Router#
7. Documente
-Las direcciones de los neighbors
200.210.222.134
200.210.222.129
-Identifique el Designated Router
200.210.222.133
-Anote cuál es la distancia administrativa de OSPF
Distancia administrativa= 110
